Factory Rejects: Stryker - 5.56x45 NATO M855 62 Gr. FMJ Steel Core – 1,000 Rounds
Description: Factory Rejects: Stryker - 5.56 line of ammunition consists of Lake City brass, boxer-primers and projectiles. Designed for plinking. This line of ammunition is 100% American made. Traditionally this round would be painted with a green tip but we often receive the projectile prior to paint.
Factory Rejects: These rounds will contain defects, for example but not limited to: dings, scratches, pull-marks, pushed in bullets, etc. In some cases these defects may cause undesired results if fired. We recommend careful inspection and care when purchasing rejected ammunition. Factory rejects are sold as-is, with no warranty.
Military Requirement: due to the components being from Lake City Ammunition Plant, the cases are required to be annealed. If the cases are not annealed, they do not meet military specs. This does not mean the cases have been previously used. Unlike civilian rounds, the military requires visual proof of the annealing process. This process causes discoloration to the cases, which also provides added durability.
While 5.56x45mm NATO rounds will fit in 223 Remington chambers, we do not recommend this round to be fired in the 223 Remington Chamber. Military rounds run at higher pressures than civilian .223 rounds. Our 5.56 M855 is loaded to Military Specifications to meet NATO expectations. Just like the Military, our expectations for our loaded rounds is to have consistent firing & grouping!